"""
solarpvmodule.comPV modules, 5-730 W

Guide

Types of solar PV modules — and how to choose in three questions

Area, temperature and budget decide the technology. Here is what each family is actually good at, and where the premium does not pay back.

Eight module technologies are in production in 2026, and the choice between them is decided by three things: how much area you have, how hot the site gets, and what the buyer will pay per watt. The table is the short version; the three questions below are how we actually size a specification.

The eight technologies compared

TechnologyRangeEfficiencyBest forTrade-off
Mono PERC410-555 W21.3 %Cheapest per watt; mainstreamSlightly higher temp loss
TOPCon N-type425-590 W22.5 %Best balance; 30-yr warranty8-12 % price premium
HJT690-730 W23.5 %Highest density; best in heat25-35 % premium
Bifacial dual-glass555-620 W22.0 %5-25 % rear gain; durableNeeds albedo and height
All-black405-440 W21.0 %Aesthetics on visible roofs2-4 % less output
Polycrystalline330-450 W18.4 %Lowest cost per watt15-20 % more area
Flexible100-400 W19.5 %2.5 kg/m2, bends to 30°5-year life
Portable5-200 W20.0 %Folds, USB outputRetail product, not a roof module

Question 1: is area or capex the constraint?

If the roof is the limit — a villa, a factory with a fixed roof area, a rooftop where racking is expensive — buy energy density: TOPCon at 22.5 % or HJT at 23.5 %. If land or roof area is free and the tender is decided on price per watt, PERC or polycrystalline wins.

Question 2: how hot is the site?

Cell temperature runs 25-30 ℃ above ambient in still air. In Rajasthan, Arizona or the Gulf, that means 70 ℃ cells and a real derating difference between technologies: HJT loses 10.8 % at 70 ℃, PERC loses 15.8 %. On a 500 kWp array that difference is worth more than the price premium.

Question 3: what does the roof look like?

Visible from the street or planning-sensitive: all-black. Curved metal shed or boat: flexible. Ground-mount or flat white membrane roof: bifacial. Standard pitched roof: TOPCon or PERC, whichever prices better that month.

What buyers get wrong

  • Comparing watts instead of kWh. A 550 W PERC module and a 550 W TOPCon module do not produce the same annual energy — the temperature coefficient and degradation curve decide.
  • Ignoring physical size. A 730 W module is 2.38 m long and 38 kg; two installers and a lifting plan are needed, and some racking is not rated for the wind area.
  • Buying on nameplate without a flash report. Ask for the measured watts of the actual pallet. A "550 W" module measuring 543 W is legal (within tolerance) and 1.3 % less energy.

Frequently asked questions

Which solar panel is best, mono or poly?

Mono for anything with limited area: 21-23.5 % against 17-19 % for poly. Poly still wins on price per watt where area is free, such as pump arrays and off-grid battery charging.

Is TOPCon better than PERC?

On efficiency, temperature coefficient and warranty, yes. On purchase price, PERC is 8-12 % cheaper. TOPCon pays back on constrained roofs and hot sites, not on cheap ground mounts.

What is a bifacial solar panel?

A module that collects light on both faces, adding 5-25 % output depending on what is underneath. On a white roof or tracker over gravel the gain is real; on a dark shingle roof flush-mounted it is under 3 %.

Tell us what you are building

Send the specification and we reply with a sized quotation in one working day.