""
solarpvmodule.comPV modules, 5-730 W

Guide

Solar PV modules by application

Roof geometry, wind load, salt exposure and the buyer's budget decide the module family before wattage ever comes up.

Module choice follows the installation, not the other way round. These are the six configurations we quote most, with the family that fits and the detail that decides it.

Residential pitched roof, 4-10 kWp

TOPCon or all-black in the 410-440 W class, 1.72 m long so two rows fit a standard roof. If the array is visible from the street, pay the 3 % efficiency penalty for all-black; if not, buy TOPCon and put the saving into kWp.

TOPCon modules → · All-black modules →

Commercial and industrial roof, 30-500 kWp

550-590 W half-cut modules at 1.13 m width, which fits standard 4-row racking layouts and keeps the module count manageable. Above 100 kWp, compare PERC and TOPCon on landed cost per kWp, not per module.

Mono PERC modules →

Utility ground-mount, 1 MW+

Bifacial dual-glass at 1500 V system voltage, on trackers where the rear gain is 15-22 %. HJT where the site is very hot or the land cost per MW is high enough to justify density.

Bifacial modules → · HJT modules →

Floating, coastal and agricultural

Dual-glass for floating (no backsheet to degrade in water vapour) and salt-mist certification for coastal sites; ammonia resistance to IEC 62716 for barns and poultry sheds.

Metal shed, boat and vehicle

Flexible modules at 2.5 kg/m² bonded to the surface. They must have airflow behind or they cook: a flexible panel glued to an insulated roof loses 15 % of output and half its life.

Flexible modules →

Camping, RV and emergency kits

Folding panels from 5 to 200 W with USB and 18 V outputs, sold as a retail product. The engineering question is hinge life, not efficiency.

Portable panels →

Tell us what you are building

Send the specification and we reply with a sized quotation in one working day.