""
solarpvmodule.comPV modules, 5-730 W

Guide

Certificates, flash data and what the warranty covers

Every module ships with its measured watts and an EL image. That is the difference between a datasheet and a delivered product.

A module is a 25-year product with a 12-year workmanship promise, and the difference between a good and a bad factory shows up in three places: the flash-test data, the lamination process, and the bill of materials for the encapsulant and junction box.

Certificates

StandardScopeStatus
IEC 61215Design qualificationCertified
IEC 61730Module safetyCertified
IEC 62804PID resistanceTested, PID-free
IEC 61701Salt mist corrosionCertified
IEC 62716Ammonia resistanceTested
ISO 9001 / 14001Factory managementCertified
UL 61730North AmericaAvailable on request

What we test, and how often

  • Flash test, 100 % of modules — I-V curve at STC, binned to 5 W and shipped with the data.
  • EL imaging, 100 % of modules — electroluminescence catches micro-cracks that flash tests miss.
  • Hi-pot — 2× Voc + 1000 V insulation test on every module.
  • Lamination peel test — one module per shift, measured against the 40 N/cm specification.
  • Thermal cycling and damp heat — IEC 61215 sequence on the design, quarterly on production samples.
  • Mechanical load — 5400 Pa snow and 2400 Pa wind on sampled units, plus a 1.2 m drop test on packaging.

Warranty terms

WarrantyTermEnd output
Product (materials)12 years—
PERC linear power25 years84.8 %
TOPCon linear power30 years87.4 %
HJT linear power30 years88.0 %
Flexible5 years80.0 %
Portable2 years80.0 %

Where claims come from, honestly

Junction-box failures on early production, backsheet cracking in hot-humid climates, and micro-cracks from handling during installation. The first two are our problem and covered; the third is a handling issue that the EL image at packing time usually proves either way.

Tell us what you are building

Send the specification and we reply with a sized quotation in one working day.