""
solarpvmodule.comPV modules, 5-730 W

Guide

Solar PV module questions, answered plainly

Price, wattage, technology, certificates and OEM terms — the questions that come up in almost every enquiry.

General

What is a solar PV module?

A solar PV module is a sealed assembly of photovoltaic cells wired in series and laminated between glass and a backsheet (or second sheet of glass) with a frame. It produces DC power proportional to the light falling on it — typically 400–730 W per module in 2026, at 21–23.5 % efficiency.

How much does a solar PV module cost in 2026?

Ex-works in China, mono PERC sits around US$ 0.085–0.09/W, TOPCon US$ 0.093–0.10/W, HJT US$ 0.12–0.125/W. In module terms: about US$ 37 for 410 W, US$ 50 for 550 W, US$ 91 for 730 W. Delivered prices add freight and duty, typically 25–45 % for container shipments to Europe or the Americas.

What is the difference between a solar panel and a solar module?

None technically — 'module' is the industry term for a single laminated unit, 'panel' is the trade and consumer term. A 'solar array' is several modules wired together; a 'string' is modules in series.

PERC, TOPCon or HJT — which should I buy?

PERC for lowest capex where area is not constrained; TOPCon for the best balance of price, efficiency and temperature behaviour on most projects; HJT where energy density per square metre is the binding constraint or the climate is very hot.

What certifications should a PV module have?

IEC 61215 (design qualification), IEC 61730 (safety), IEC 62804 (PID), IEC 61853 (energy rating), plus ISO 9001/14001 for the factory and, for Europe, CE marking. North America requires UL 1703/61730 and often CEC listing for rebates.

How long do solar modules last?

25–30 years with 80–87 % of original output remaining. Degradation is about 0.4–0.55 %/year for PERC and TOPCon, less for HJT. The most common field failures are junction-box and backsheet, not cell degradation.

Mono PERC

How much does a 550 W solar PV module cost?

About US$ 50 ex-works (roughly US$ 0.09/W) in our range, FOB China. Container pricing for 620 modules lands near US$ 0.11–0.13/W delivered to most ports before duty.

PERC or TOPCon?

PERC is cheaper today and still the best value for warm, high-irradiance sites with limited roof area constraints. TOPCon costs 8–12 % more and adds about 1.2 % efficiency plus a lower temperature coefficient — worth it on constrained roofs and hot climates.

How many 550 W modules for a 10 kW system?

Eighteen modules give 9.9 kWp. With a 10 kW inverter that is a 0.99 DC/AC ratio; most designers would use 20 modules (11 kWp) on a 10 kW inverter for better winter yield.

TOPCon N-type

Is TOPCon worth the extra cost?

On a constrained roof, in a hot climate, or on a 25+ year project, yes: 15–25 W more per module plus a better temperature coefficient. For a cheap ground-mount where area is free, PERC still wins on capex.

What does N-type mean?

The silicon wafer is doped with phosphorus rather than boron. N-type cells have a higher minority-carrier lifetime and do not suffer light-induced degradation (LID) the way p-type PERC does — the reason the 30-year warranty is credible.

Do TOPCon modules need different inverters?

No. Electrically they behave like any other module: 13–14 A Imp, 41–50 V Vmp. Any string inverter with a 15 A input accepts them.

Bifacial dual-glass

How much extra power does a bifacial module really produce?

On a flat white roof at 1 m mounting height, 8–12 %. On a tracker over light gravel, 15–22 %. Flush-mounted on a dark shingle roof, under 3 % — not worth the premium.

Can I use bifacial modules on a normal roof?

Yes, but the gain will be small unless the roof is white and the modules are raised. The dual-glass build still brings durability benefits, so many installers choose it for coastal and hot sites regardless.

Does the inverter need to be oversized for bifacial?

Size the DC/AC ratio to the front-side power plus expected rear gain, or accept some clipping. A 1.2 ratio on front-side watts is safe on most commercial roofs.

HJT 210 mm

Is HJT worth the price premium?

Where land or roof area is expensive, yes: 730 W per module cuts module count, racking, cabling and labour per kWp. On a cheap ground-mount with unlimited area, TOPCon is usually the better financial choice.

Do HJT modules degrade faster?

No — the opposite. HJT has no boron-oxygen LID and a very low first-year degradation (about 1 %), which is why 30-year warranties at 88 %+ are standard.

Are 210 mm modules harder to install?

They are larger (2.38 × 1.30 m, about 38 kg), so two installers and a lifting plan are needed. Standard mid-clamps and rails work; check the racking's design load for the bigger wind area.

All-black

Do all-black modules produce less power?

Two to four percent less than an equivalent silver-frame module, because the black surfaces run hotter. On a 420 W module that is roughly 8–15 W — rarely decisive on a residential roof.

Will they look uniform after years?

Yes, if the backsheet is quality: cheap black backsheets yellow and crack within five years. Ours uses a UV-stabilised triple-layer backsheet with a 25-year warranty.

Can all-black modules be used on a commercial roof?

Yes, but the aesthetic premium buys nothing there. Use standard or bifacial modules and spend the difference on more kWp.

Tell us what you are building

Send the specification and we reply with a sized quotation in one working day.